Welcome

Interested in becoming a Switch-N-Go® distributor? Fill in the short form below to get started:

Labels and Certification

ALTERED VEHICLE CERTIFICATION (LABELS GRAY)

Attention: These preprinted labels are NOT for use with the Vehicle Certification Label Printing Program.

Gray labels are used by manufacturers that alter a vehicle — prior to the first retail sale — that has been certified in the final stage. Examples of altering include all manufacturing operations performed that affect an applicable Federal Motor Vehicle Safety Standard (i.e., snowplow installation on a pickup, pickup box removal, etc.). A self-voiding feature eliminates the threat of unauthorized tampering. Labels provide for metric and English units of measure as required by CFR part 567.5. (50 labels and covers per package).

FINAL-STAGE CERTIFICATION (LABELS WHITE)

Attention: These preprinted labels are NOT for use with the Vehicle Certification Label Printing Program.

White labels are used by the final-stage manufacturer if the vehicle cannot be completed and certified within the guidance and limitations provided in the Incomplete Vehicle Document. The final-stage manufacturer is responsible for ensuring the completed vehicle conforms to any applicable Federal Motor Vehicle Safety Standards. Labels provide for metric and English units of measure as required by CFR part 567.5. (100 labels and covers per package)

LOAD CARRYING CAPACITY MODIFICATION (LABELS YELLOW)

If you are adding permanently attached equipment in excess of 1.5 percent times the gross vehicle weight rating or 100 pounds (whichever is less) to a vehicle — and not changing tires or wheels — the existing load carrying capacity of the vehicle placard must be updated. The Load Carrying Modification Label can be applied within 25 millimeters (approximately one inch) of the existing vehicle placard. (100 labels and covers per package)

LABEL PRINTING PROGRAM (STARTER CD KIT)

Attention: These preprinted labels are NOT for use with the Vehicle Certification Label Printing Program.

If you are adding permanently attached equipment in excess of 1.5 percent times the gross vehicle weight rating or 100 pounds (whichever is less) to a vehicle — and not changing tires or wheels — the existing load carrying capacity of the vehicle placard must be updated. The Load Carrying Modification Label can be applied within 25 millimeters (approximately one inch) of the existing vehicle placard.

*Pre-printed labels do not work with this program; use Label Printing Program Extra Labels only Item #2229.

LABEL PRINTING PROGRAM (STARTER USB KIT)

Attention: These preprinted labels are NOT for use with the Vehicle Certification Label Printing Program.

Laser print six different labels with this easy-to-use Microsoft® Excel-based program. Print yellow final-stage, white final-stage, orange specialized, gray altered, green intermediate-stage vehicle labels and blue trailer certification labels. One standard-size label stock in white accommodates all six labels — just print and trim to the appropriate length.

This Starter Kit includes the Label Printing Program on a USB flash drive, Program instructions, a ruler and 100 labels. Each 8½- by 11-inch sheet contains four labels. The USB flash drive includes a true-type font that must be installed as well as an electronic copy of the Program instructions. Labels come with clear Mylar protective covers and have a self-voiding feature that meets the requirements of 49 CFR part 567.5.

*Pre-printed labels do not work with this program; use Label Printing Program Extra Labels only Item #2229.